角型光電傳感器德國HYDAC賀德克

角型光電傳感器德國HYDAC賀德克

輸出功能    暗通模式
開關量輸出DC電壓降zui大值 [V]    2
開關量輸出DC的持續電流負載 [mA]    200
用于功能監控輸出的當前負載zui大值 [mA]    200
開關頻率DC [Hz]    200
電氣設計    PNP
短路保護    是
短路保護類型    脈沖
過載保護    是
產品標識    角型光電傳感器
尺寸    60 x 10 x 83 mm
側面長度X    31 mm
側面長度Y    50 mm
傳感器寬度Z    40.31 mm
工作電壓DC    10...35 V
電氣設計    PNP
輸出功能    暗通模式
外殼防護等    IP 67
環境溫度    -10...60 °C
原材料    外殼: 模壓鑄鋅; 透鏡: 玻璃
連接方式    接插件
顯示    開關狀態: 1 x LED 黃色; 操作: 1 x LED 綠色; 功能: 1 x LED 黃色
Schaltfrequenz DC max.    200 Hz
光線種類    紅外線
產品    易福門或同價值的Instruction

角型光電傳感器德國HYDAC賀德克
輸出功能    暗通模式
開關量輸出DC電壓降zui大值 [V]    2
開關量輸出DC的持續電流負載 [mA]    200
用于功能監控輸出的當前負載zui大值 [mA]    200
開關頻率DC [Hz]    200
電氣設計    PNP
短路保護    是
短路保護類型    脈沖
過載保護    是
產品標識    角型光電傳感器
尺寸    60 x 10 x 83 mm
側面長度X    31 mm
側面長度Y    50 mm
傳感器寬度Z    40.31 mm
工作電壓DC    10...35 V
電氣設計    PNP
輸出功能    暗通模式
外殼防護等    IP 67
環境溫度    -10...60 °C
原材料    外殼: 模壓鑄鋅; 透鏡: 玻璃
連接方式    接插件
顯示    開關狀態: 1 x LED 黃色; 操作: 1 x LED 綠色; 功能: 1 x LED 黃色
Schaltfrequenz DC max.    200 Hz
光線種類    紅外線
產品    易福門或同價值的Instruction

> Reaction, result
→ Cross-reference
Important note
Non-compliance can result in malfunctions or interference.he unit must be connected by a qualified electrician.
? The national and international regulations for the installation of electrical
equipment must be adhered to.
? Ensure voltage supply to EN 50178, SELV, PELV.
The following indications apply if there is a UL listing mark on the product:
? For use in NFPA 79 applications only. Adapters providing field wiring
means are available from the manufacturer. Refer to manufacturers
information.
? The device shall be supplied from an isolating transformer having a
secondary Listed fuse rated
a) max 5 amps for voltages 0...20 Vrms (0...28.3 Vp) or
b) 100/Vp for voltages of 20...30 Vrms (28.3...42.4 Vp)
型號    OPL205
> Reaction, result
→ Cross-reference
Important note
Non-compliance can result in malfunctions or interference.he unit must be connected by a qualified electrician.
? The national and international regulations for the installation of electrical
equipment must be adhered to.
? Ensure voltage supply to EN 50178, SELV, PELV.
The following indications apply if there is a UL listing mark on the product:
? For use in NFPA 79 applications only. Adapters providing field wiring
means are available from the manufacturer. Refer to manufacturers
information.
? The device shall be supplied from an isolating transformer having a
secondary Listed fuse rated
a) max 5 amps for voltages 0...20 Vrms (0...28.3 Vp) or
b) 100/Vp for voltages of 20...30 Vrms (28.3...42.4 Vp)
型號    OPL205